HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Full Text (PDF) Services Similar articles in this journal Similar articles in ISI Web of Science Similar articles in PubMed Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via ISI Web of Science (1) Citing Articles via Google Scholar Google Scholar Articles by Mahmoud, A. Search for Related Content PubMed PubMed Citation Articles by Mahmoud, A.

Pre-overloading to Extend Fatigue Life of Cast Clasps

Department of Conservative Dentistry and Prosthodontics, Dental School, University of Jordan, Amman 11942, Jordan; anabtawime{at}yahoo.com

Permanent deformation in bending is associated with the development of residual stresses. The objective of this study was to characterize those residual stresses and test whether they can be manipulated to extend the fatigue lives of cast clasps. Simulations with validated non-linear finite element models were used to characterize the residual stresses in clasps cast from Ti-6Al-7Nb, Co-Cr, and Type IV gold alloys. In addition, two groups of as-cast and pre-overloaded (subjected to a load that produced 20 µm of permanent deformation) Ti-6Al-7Nb clasps (10 specimens each) were subjected to cyclic 0.5-mm deflections at 5 Hz until fatigue. Pre-overloaded specimens demonstrated significantly longer fatigue lives (32,200 ± 17,300 cycles) than did those tested in the as-cast condition (17,900 ± 7600 cycles), consistent with the maximum tensile stress values revealed by finite element analysis.

KEY WORDS: fatigue • finite element analysis • non-linear analysis • residual stresses • clasp