Journal of Dental Research, Vol 80, 864-868, Copyright © 2001 by International & American Associations for Dental Research Online Journals

ARTICLES

Properties of opaque resin composite containing coated and silanized titanium dioxide

K. Yoshida, Y. Taira and M. Atsuta
Department of Fixed Prosthodontics, Nagasaki University School of Dentistry, Sakamoto, Japan. keiichi@net.nagasaki-u.ac.jp

Titanium dioxide (TiO2) is mainly used as a pigment in opaque resin composites for application to the surface of a metal framework. The hypothesis in this paper is that particles of silica/alumina (SiO2/Al2O3)-coated TiO2 treated with a silane coupling agent could bond effectively with resin monomers of opaque resin composites. Untreated TiO2 was used as the control filler. Compressive and flexural strength specimens were prepared by the heat-curing method, because these bulk specimens could not be made by the typical photo-curing method. The treated composite had significantly higher compressive and flexural strengths than the untreated composite after 6 months' immersion in water. Scanning electron microscopy of the fractured composite surfaces showed an interface failure between TiO2 and resin for the untreated composite and cohesive failure within the resin for the treated composite after 6 months' immersion. The light-activated opaque resin composite containing treated TiO2 exhibited significantly higher bond strength to a noble dental alloy after 5000 thermal cycles than that containing untreated TiO2. Thus, silanized SiO2/Al2O3-coated TiO2 appears to be clinically useful as a filler of opaque resin composites.

This article has been cited by other articles:

				J.P. Matinlinna, L.V.J. Lassila, I. Kangasniemi, and P.K. Vallittu Isocyanato- and Methacryloxysilanes Promote Bis-GMA Adhesion to Titanium J. Dent. Res., April 1, 2005; 84(4): 360 - 364. [Abstract] [Full Text] [PDF]